Powerful EDM Programming
 Fast 2-axis contouring |
 Powerful 4-axis contouring with automatic reverse and skim cuts |
Mastercam’s suite of 2-axis and 4-axis wirepaths lets you choose the best method for the results you need. With Mastercam, you have complete control over the wire motion, angle, entries and exits, and much more. And you get that control in a clear, easy to understand way.
- 2-axis contour, with or without taper angle.
- No-core cutting.
- 4-axis synchronization with automatic or manual input and automatic skim and reverse cuts.
- 4-axis surface finish by chordal deviation.
- 4-axis interpolation support (G2/G3).
- Graphical programming with options for straight cut, tapered cut, or tapered cut with land from either direction.
- Automatic lead-in and lead-out strategies.
- Contour multiple parts using a single window selection.
- Automatic maximum taper/UV travel detection.
- Special Sharp Corner option creates an outside loop to ensure corners are not rounded off.
- Automatic wirepath corner filleting.
- Translate wirepaths for easy part repetition without creating new geometry.
- Modify control settings, corner types, and taper angles at any point in a contour.
- Define separate lead-ins and lead-outs for wirepaths with trimming of leads to improve efficiency.
- Apply tapers before or after a vertical wirepath.
- Click and dynamically drag a machining start point to anywhere on your model.
- Wirepath filtering significantly reduces the size of a program. The filter automatically turns small, multiple linear moves into single line or arc moves.
 Streamline your multiple-cut jobs |
 Mastercam simplifies 2- and 4-axis nested programming |
 Run operations unattended with efficient no-core cutting |
